Connect the following on the Kepler modem:
Power: connect the standard C13 power cable to a 110-240 VAC supply. The power supply is universal and supports all global power sources.
NOTE: The modem automatically turns on when plugged into mains power. The current chassis revision does not have any power indicators on the front panel.
The front panel LED labelled “Power” is only illuminated when the modem is active for a satellite pass.
- Connect the Management Ethernet port: connect the red Ethernet patch cable between the leftmost port on the modem to Port 3 on the server. The LEDs on both sides will illuminate.
Modem Control Port (left, red below):
Kepler Server Port 3 (red below):
- Connect the Data Ethernet port: connect the blue Ethernet patch cable between the top port on the modem to Port 4 on the server. The LEDs on both sides will NOT illuminate.
Modem Data port (right, blue below):
Kepler Server Port 4 (blue below):